Skip to main content
science.uni-obuda.hu logo
  • Címlap
  • Szerzők
  • Kulcsszavak
Home » Publications

Publications

  • List
  • Filter
Found 64 results

Filters: Author is Rácz, Pál  [Clear All Filters]
2012
Rácz, P., N. Göbl, and D. Horváth, "Elektrodinamikus megmunkálások", Repüléstudományi Konferencia 2012, vol. XXIV., Szolnok, Repüléstudományi Közlemények, pp. 119-141, 04/2012.
Rácz, P., and P. Porkoláb, "Csövek elektromágneses alakítása", Fiatal Műszakiak XVII. Tudományos Ülésszaka, Kolozsvár , Erdélyi Múzeum Egyesület, pp. 287-290, 03/2012.
Rácz, P., N. Göbl, and D. Horváth, "Rúd-cső kötések készítése elektromágneses alakítással", XIV. Képlékenyalakító Konferencia, Miskolc, Hungary, Miskolci Egyetem, pp. 75-81, 02/2012.
2011
Rácz, P., and G. Zafner, "Integrated Mould Manufacturing System in Digital Environment", Óbuda University e‐Bulletin, vol. 2, issue 1: Óbuda University, pp. 225-234, 11/2011.
Rácz, P., and G. Zafner, "Automated manufacturing system in mold making", Factory Automation 2011 Conference, Győr, Hungary, Széchenyi István Egyetem, Győr , pp. 80-88, 05/2011.
Rácz, P., and G. Zafner, "Automatizálás a szerszámgyártásban", FMTÜ, Kolozsvár, Erdélyi Múzeum Egyesület, pp. 249-252, 03/2011.
2010
Rácz, P., and G. Zafner, "Automatizálás a szerszámgyártásban", Nemzetközi Gépész, Mechatronikai és Biztonságtechnikai Szimpózium, Budapest, Óbudai Egyetem Bánki Donát Gépész és Biztonságtechnikai Mérnöki Kara, 11/2010.
2007
Rácz, P., "Öttengelyes, ötoldalas megmunkálások", Gyártóeszközök, szerszámok, szerszámgépek, vol. 2007/1, issue 167: Info-Prod Kiadó Kft., pp. 4-6., 04/2007.
2006
Rácz, P., "A korszerű fémfűrészelés gépei", Gyártóeszközök, szerszámok, szerszámgépek, vol. 2006/1, issue 150: Info-Prod Kiadó Kft., pp. 14-16, 04/2006.
2001
Rácz, P., A. Kovács, M. Bencsik, and I. Balikó, "Műanyagfröccsöntő szerszámok tervezésének és gyártásának korszerű módszerei", Gyártóeszközök, szerszámok, szerszámgépek, vol. 2001/1, issue 65: GLT Info-Prod Kiadó Kft., pp. 31-34, 03/2001.
1999
Rácz, P., P. Tamás, and L. Cser, "Knowledge processing in rapid tool manufacturing", 2nd International Conference on Industrial Tools, ICIT '99, Maribor, Slovenia, TECOS - Slovenian Tool and Die Development Centre, pp. 18-22, 04/1999.
1997
Rácz, P., Z. Maros, and L. Cser, "Abrasive Water Jet Cutting at the Bay Zoltán Institute", Achievements in Mechanical and Material Engineering, 6th Int. Conference, Miskolc-Tapolca, Hungary, Bay Zoltán Institute, pp. 3-7, 12/1997.
Rácz, P., and M. Tisza, "Computer Aided Technological Process Planning and Tool Design Systems in Sheet Metal Forming, Possibilities and Solutions", Int. Conf. on Design and Production of Dies and Molds, Istambul, Turkey, pp. 211-216, 06/1997.
Rácz, P., L. Cser, and U. Engel, "Tool Life and Tool Quality", International Conference on Industrial Tools, ICIT’97, Maribor, Slovenia, TECOS - Slovenian Tool and Die Development Centre, pp. 51-60, 04/1997.
1996
Rácz, P., I. Gál, A. Kiss, and M. Tisza, "An overall evaluation of sheet metal formability by tensile test", 19th Biennial IDDRG Congress (International Deep Drawing Research Group) , Miskolc, Hungary, University of Miskolc, pp. 545-548, 09/1996.
Rácz, P., G. Krállics, and D. Malgyn, "Finite Element Simulation of Deep-Drawing Processes for Cold and Hot Forming Conditions", Numerical and Physical Study of Material Forming Processes, NUPHYMAT’96, Sophia-Antipolis, France, CEMEF - Ecole Nationale Supériure des Mines de Paris, pp. 15-20, 06/1996.
Rácz, P., and M. Tisza, "General Review of Computer Aided Engineering in Sheet Metal Forming", Machinery (Publ. of Univ. Miskolc), vol. 46: University of Miskolc, pp. 143-156, 05/1996.
Rácz, P., and F. Backes, "Some Aspects of the Computer Aided Design of Progressive Dies", 4th International Conference on Sheet Metal, SheMet’96, Twente, Netherlands, University of Twente, pp. 447-456, 04/1996.
1995
Rácz, P., and M. Tisza, "Some aspects of Computer Aided Design in Metal Forming", A Miskolci Egyetem fennállásának 260. évfordulója alkalmából rendezett Jubileumi Tudományos Konferencia: Bányászati és Műszaki Földtudományi szekció előadásai,, Miskolc, Hungary, University of Miskolc, pp. 77-84, 09/1995.
1994
Rácz, P., and M. Tisza, "Expert Systems for Cold Metal Forming Process", 5th International Conference on Metal Forming, Birmingham, Great Britain, pp. -, 09/1994.
Rácz, P., and M. Tisza, "Tudásalapú rendszer térfogatalakító technológiák tervezésére", MicroCAD'94, Miskolc, Hungary, Miskolci Egyetem, pp. 36-43, 03/1994.
Rácz, P., M. Tisza, and J. Sárvári, "Tudásalapú rendszer térfogatalakító technológiák tervezésére", Gép, vol. 46, issue 2: GTE, Budapest, pp. 18-22, 02/1994.
1993
Rácz, P., and M. Tisza, "Development of Expert Systems for Metal Forming Applications", 2nd Int. Conf. on Machines & Technology, Cugir, Romania, Universitatii Tehnice din Cluj-Napoca, pp. 273-276, 10/1993.
Rácz, P., and M. Tisza, "Expert System for Process Planning of Deep-Drawing", 2nd Int. Conf. on Machines & Technology, vol. 45, no. 10-11-12, Cugir, Romania, Universitatii Tehnice din Cluj-Napoca, pp. 80-84, 10/1993.
Rácz, P., and M. Tisza, "Expert System for Deep-drawing", MicroCAD-System'93, Kosice, Slowakia, pp. -, 09/1993.
  • 1
  • 2
  • 3
  • next ›
  • last »

Who's online

There are currently 0 users and 113 guests online.