Publications
Found 35 results
Filters: Author is Gergely M [Clear All Filters]
"Application of Computer Simulation in Heat Treating of Steels",
Proceedings of the 10th Congress of the IFHT, London, IOM Communications, pp. 687 - 695, 1999.
"Comparative analysis of non-isothermal austenite transformation",
Proceedings of the 10th Congress of the IFHT, London, IOM Communications, pp. 630 - 634, 1999.
"Az additivitási elv érvényesülése az ausztenit izotermikus átalakulásakor",
BÁNYÁSZATI KOHÁSZATI LAPOK-KOHÁSZAT, vol. 127, issue 9, pp. 358 - 361, 1994.
"Comparative analysis of kinetic models used for description of non-isothermal austenite transformation",
MATERIALS SCIENCE FORUM, vol. 163-166, pp. 667 - 672, 1994.
"Investigation of gamma-alfa transformation of steels",
Conference Proceedings of the EUROMAT TOPICAL 94, Budapest, OMBKE, pp. 592 - 596, 1994.
"Mathematical modeling of transformation processes of heat treatment of steels",
JOURNAL OF METALS, vol. 232, pp. 121 - 127, 1994.
"Aide au choix d'acier par calcul des carasteristiques méchanique",
TRAITMENT THERMIQUE, vol. 257, pp. 25 - 32, 1993.
"Aide au choix d'acier par calcul des carasteristiques méchanique",
TRAITMENT THERMIQUE, vol. 261, pp. 38 - 44, 1993.
"Property Prediction of Quenched and Case Hardened Steels Using a PC",
Quenching and carburising , Proceedings of the Third International Seminar of IFHT, Oxford, The Institute of Metals, pp. 257 - 273, 1993.
"Informatique and traitment thermique",
TRAITMENT THERMIQUE, vol. 256, pp. 31 - 35, 1992.
"COMPUTERIZED PROCESS PLANNING IN HEAT-TREATMENT PRACTICE USING PERSONAL COMPUTERS",
HEAT TREATMENT OF METALS, vol. 18, pp. 117 - 121, 1991.
"Computerized Properties Prediction and Technology Planning in Heat Treatment of Steels",
ASM handbook, Ohio, ASM International, pp. 638 - 656, 1991.
"Személyi számítógép alkalmazása hőkezelési folyamatok szimulációjára",
XIV. Kohászati Anyagvizsgáló Napok, pp. 245 - , 1991.
"Berechnung der Gefügeausbildung und der mechanischen Eigenschaften von Stahlen nach Abschrecken unter Verwendung eines PC",
46. Harterei kolloquium, pp. 112 - , 1990.
"Computer Prediction of Process Parameters of Two-Stage Gas Carburizing",
JOURNAL OF HEAT TREATING, vol. 8, issue 1, pp. 55 - 61, 1990.
"Computer Prediction of Process Parameters of Two-Stage Gas Carburizing",
JOURNAL OF HEAT TREATING, vol. 8, issue 1, pp. 55 - 61, 1990.
"Application of a Computerized Information System for the Selection of Steels and Their Heat Treatment Technologies",
JOURNAL OF HEAT TREATING, vol. 5, issue 2, pp. 125 - 140, 1988.
Abstract
"Application of microprocessors for property monitoring and control in modern heat treatment practice",
Heat treatment '87, London, The Institute of Metals, pp. 235 - 239, 1988.
"A Practical Method for the Computer Prediction of Technological Parameters of Two-Stage Gas Carburizing",
Heat treatment and surface engineering: new technology and practical applications, Ohio, ASM International, pp. 95 - 98, 1988.
"A Practical Method for the Computer Prediction of Technological Parameters of Two-Stage Gas Carburizing",
Heat treatment and surface engineering: new technology and practical applications, Ohio, ASM International, pp. 95 - 98, 1988.
"Utilization of databases of measured steel properties and of heat treatment technologies in practice",
Heat treatment '87, London, The Institute of Metals, pp. 225 - 233, 1988.
"MATHEMATICAL TREATMENT OF NONISOTHERMAL TRANSFORMATIONS",
MATERIALS SCIENCE AND TECHNOLOGY, vol. 3, pp. 365 - 371, 1987.
"Computer programs in the service of heat treatment technologists and steel selectors",
5th International Congress on Heat Treatment of Materials, Budapest, Gépipari Tudományos Egyesület, pp. 186 - 195, 1986.
"Data bases of measured steel properties and of heat treatment technologies",
5th International Congress on Heat Treatment of Materials, Budapest, Gépipari Tudományos Egyesület, pp. 153 - 163, 1986.
"Hőkezeléstechnológiai adatbázis létesítése",
KORSZERŰ TECHNOLÓGIÁK, vol. 6, pp. 9 - 13, 1985.