Publications
Found 57 results
Szűrők: Szerző = Gyula Hermann [Minden szűrő visszaállítása]
"Calibration machine for linear scales",
19th International Workshop on Robotics in the Alpe-Adria-Danube Region RAAD 2010, pp. 95-100, 2010.
"Design and calibration of a low cost measuring probe",
Buletinul Stiinfic al Universitati Politehnica din Timisoara Romania Seria Automatica si Calculatore, vol. 55, issue 69, pp. 5-10, 2010.
"Design of a low cost submicron measuring probe",
8th IEEE International Symposium on Intelligent Systems and Informatics, Subotica, Serbia, pp. 401-404, 2010.
"Design of a low-cost measuring probe",
Solid State Phenomena, vol. 164, pp. 195-200, 2010.
"Retrofitting a Length Measuring Machine for Linear Scale Calibration",
ICCC-CONTI 2010, Timisoara, Romania 2010.05.27-2010.05.29, pp. pp. 11-15, 2010.
"Design of a Planar High Precision Motion Stage",
Proceedings of The Seventh International Workshop on Robot Motion and Control, Berlin ; Heidelberg, Springer, pp. 371 - 379, 2009.
"Design of tactile measuring probes for coordinate measuring machine",
Acta Polytechnica Hungarica, vol. 6, issue 1, pp. 63-77, 2009.
"Calibration machine for linear scales",
7th International Symposium on Intelligent Systems and Informatics, Subotica, Serbia, pp. 227-230, 2009.
"Computer controlled dial gauge calibration system",
Buletnul Stiintific al Universitati Politehnica din Timisoara Romania Seria Automatica si Calculatore, vol. 54, issue 2, pp. 105-108, 2009.
"Design of a 2D high precision motion stage",
2nd International Symposium on Logistics and Industrial Informatics LINDI 2009, Linz, Austria, pp. 109-113, 2009.
"The design of a low cost submicron measuring probe",
5th International Conference on Mechatronic Systems and Materials MSM 2009, Vilnius, Latvia, pp. 34, 2009.
"Design of a low cost submicron measuring probe",
7th International Symposium on Applied Machine Intelligence and Informatics SAMI 2009, Herlany, Slovakia, pp. 93-97, 2009.
"Design of a planar high precision motion stage",
7th International Workshop on Robot Motion and Control, Czerniejewo, Poland, pp. 371-379, 2009.
"Generalized geometric error correction in coordinate measurement",
Intelligent Engineering Systems and Computational Cybernetics, pp. 267-276, 2009.
"A low cost measuring probe",
5th International Symposium on Applied Computational Intelligence and Informatics SACI 2009, Timisoara, Romania, pp. 223-227, 2009.
"Nagypontosságú mérőtapintó tervezése",
Gépgyártástechnológia, vol. XLIX, issue 4-5, pp. 195-200, 2009.
"Retrofitting a length measuring machine for linear scale calibration",
13th International Conference on Intelligent Engineering Systems INES 2009, Barbados, pp. 79-82, 2009.
"Analysis of an SVD-Based Adaptive Controller Using the Double Pendulum + Cart System as a Paradigm",
8th WSEAS International Conference on APPLIED INFORMATICS AND COMMUNICATIONS (AIC'08), pp. 77 - 89, 2008.
"On the Robustness of the Slotine-Li and the FPT/SVD-based Adaptive Controllers",
WSEAS TRANSACTIONS ON SYSTEMS AND CONTROL, vol. 3, issue 9, pp. 686 - 700, 2008.
"Constructing of tactile measuring probes for coordinate measurement",
12th International Conference on Mechanical Engineering 2008, Bratislava, Slovakia, pp. III-10-III-11, 2008.
"Construction of a high precision measuring probe",
6th IEEE International Conference on Computational Cybernetics ICCC 2008, Stará Lesna, Slovakia, pp. 219-222, 2008.
"Design of a calibration system for measuring probes",
6th International Symposium on Intelligent Systems and Informatics, Subotica, Serbia, pp. 44-47, 2008.
"Design of a calibration system for measuring probes",
12th International conference on Intelliegnet Engineering Systems INES 2008, Miami, USA, pp. 59-62, 2008.
"Design of a tactila measuring probe for coordinate measurement",
9th International Symposium of Hungarian Researchers on Computational Intelligence and Informatics, Budapest, Hungary, pp. 479-487, 2008.
"Design of a tactile measuring probe",
19th Biannual Conference on Manufacturing, Budapest, Hungary, pp. 119-124, 2008.